Power Cleaner is phosphate, nitrate and nitrate-free and is developed to exceed all regulatory and legislative guidelines in regard to the environment impact of the formulation. It is compatible for...
No, the TF1 Omega Filter has been designed to ensure that even when it reaches a level of maximum collection, system water can still pass through the filter, short-circuiting the...
BS 7593:2019 recommends that the inhibitor should either be re-dosed at 5-year intervals or, a more comprehensive laboratory test is conducted every five years to provide a more in-depth analysis,...
The Fernox Express Inhibitor Test is available from all major merchants and online plumbing retailers.
...Power Cleaner F8 is a concentrated formulation supplied in 500ml bottles, to reduce packaging waste. Just one bottle treats larger systems of 130 litres, 16 radiators or 250 sqm of...
Power Cleaner F8 is pH neutral and is not acidic, therefore no neutralisation is needed. This saves time on-site.
...Citrate action is a term used to describe the powerful chelating effect that the citrate ion has on metal ions. This strong binding effect means that corrosion debris is lifted...
No. Whilst Power Cleaner F8 is formulated with citric acid, this is neutralised in-situ to form the neutral citrate species which has such an effective cleaning action.
...You will get a very good system clean with both products. However, if the system is especially dirty it is recommended to use the stronger Power Cleaner F8 which will...
Power Cleaner F8 is a pH neutral cleaner which has low environmental impact and can be safely disposed via foul drain.
...Power Cleaner F8 can be dosed into the system up to a week before flushing. This high performance, strong cleaner is effective after one hour circulating under normal operating conditions.
...Yes! the Express Inhibitor Test is a universal test that will check for the presence of all molybdate based inhibitors within the system water.
...If the dip test shows less than 100ppm, installers can immediately resolve the issue by adding a high-quality inhibitor such as Fernox Protector F1 or where a filter is fitted,...
With the initial dose, its key to make sure the system water is circulated properly so that the inhibitor is sufficiently mixed. Fernox recommend that you let the system circulate...
