How to disinfect a water system?

Disinfection is a process which destroys or irreversibly inactivates micro-organisms, reducing their numbers to a safe level.

Its purpose is to leave a clean water supply. It must be carried out in the following circumstances:

  • During routine annual system maintenance
  • New installations n After major system extensions or alterations
  • After installing underground pipework, except localised repairs which require prior disinfection of components
  • Where it is suspected that contamination may have occurred: i.e. fouling by sewage, or if systems have been inspected or repaired
  • Where a system has not been in regular use nor regularly flushed

What should be done?
Fernox offers a silver catalysed hydrogen peroxide treatment, Fernox LP Sterox.

Fernox LP Sterox
This product treats a wide spectrum of biocidal activity including all water-borne bacteria and viruses. It is particularly valuable in modern water system hygiene management where more conventional treatments such as chlorination are unsuitable. Fernox LP Sterox is supplied in one litre bottles. This will treat 300 litres of system water. After treatment, it is not critical that Fernox LP Sterox is flushed from the water supply as it naturally decomposes to water and oxygen.

Water should be run from each outlet and tested with a Fernox LP Sterox Test Strip until the concentration in the water is less than 200ppm.

Share:

More posts:

Can Fernox Leak Sealers be used in combination boilers?

Yes, all Fernox internal leak sealers, such as Fernox Leak Sealer F4, are safe for use with combination and other low water content boilers. They will not block valves or vents. Leak Sealer F4 Express is recommended for all pressurised systems as this can be added in 30 seconds via a radiator, filling loop or Fernox TF1 Filter, without the

Read More »

What is a TF1 Omega Filter?

The TF1 Omega Filter is a high performance, nickel plated, in-line system filter, which is designed for domestic heating systems. It is produced with quality materials and components and has been manufactured using precision engineering. Combining the strength of a powerful Neodymium magnet with Hydronic Particle Separation technology, the TF1 Omega Filter offers a superior collection capacity for both magnetic

Read More »

What are the benefits of using the TF1 Omega Filter?

The TF1 Omega Filter collects all types of corrosion, scale and installation debris. By preventing these contaminants from circulating within a heating system, energy efficiency levels are optimised and the inconvenience of a system breakdown coupled with a major repair or replacement cost can be avoided.

Read More »

Country