Search Products…
Generic filters

Search Products…
Generic filters

System Water Test

Product Code: 62254 Category:

A simple and easy-to-use turbidity test to check the quality of system water and determine appropriate treatment to ensure the system works at optimum efficiency, and the boiler is fully protected.

Fill the tube with a 50 ml sample of system water taken from either the boiler or a radiator. Look down the tube and focus on the black and yellow target at the base of the tube. Depending on the cleanliness of water, there are 4 recommended treatment options;

1. The target is clearly visible and the system is adequately inhibited (with the boiler displaying a retreatment label) – No action required
2. The target is clearly visible but the system may not be adequately inhibitor (no retreatment label is displayed on the boiler) – Dose with Fernox Protector F1
3. The target is visible but blurred indicating contaminants are present in the system water – Fit a Fernox TF1 Filter and dose with Fernox Protector+ Filter Fluid
4. The target is not visible indicating a heavily sludged and dirty system due to corrosion and limescale formation – Clean the system with Fernox F3 Cleaner or Fernox Power Cleaner F8, fit a Fernox Filter and dose with Fernox Protector+ Filter Fluid

System Water Test with Andy Kaye
Page 1 | 1-1 of 1

There are no FAQs for this product.

Take a look at some of our other FAQs by clicking here or get in touch with us.

There are no downloads for this product.

Take a look at some of our other downloads by clicking here or get in touch with us.

Filters Sort results
Product Code
Single Unit Dimensions
Single Unit Barcode
Outer Carton Dimensions
Outer Carton Barcode (ITF)
62254
59 × 200 × 52 mm
x x mm
5.01455E+12

Newsletter

Country