Application and Dosage
Dilute before use with mains water using no more than 600 litres of water per 1 litre of Fernox HP Cleaner. Flush out the ground collector with fresh mains water before filling with diluted cleaner. Circulate for a minimum of one hour then flush out thoroughly until the water runs clear. After cleaning, Fill the ground collector with either Fernox HP-15 or HP-15c at the required concentration.
Appearance: Deep green liquid
pH (conc.): 12.8
pH (in use): 7.1 – 7.8
Special properties: Low foaming
Packaging, Handling and Storage
Fernox HP Cleaner is supplied in 1 litre and 10 litre bottles. Fernox HP Cleaner is classified as corrosive. Avoid contact with skin. Risk of serious damage to eyes. May cause sensitisation by skin contact. Contains 1,2-benzisothiazol-3(2H)-one. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing gloves and eye/face protection. If swallowed seek medical advice immediately and show this container label. Dispose of this material and its container via a licensed waste disposal contractor. Use biocides safely.